|
 |
|
Publications |
|
PAPERS IN INTERNATIONAL
JOURNALS |
-
A. Lontos, A. Antoniou, I.
Chrysanthou, S. Christofides, O. Demetriadou, Chr. Panagidis, Ch.
Yiannakkaras, D. Kaolis, Y. Parpottas, Construction of Inflatable
Lungs to Simulate Respiratory Motion in Myocardial Perfusion Imaging,
XIV Mediterranean Conference on Medical and Biological Engineering
and Computing 2016, Springer International Publishing Switzerland
2016, IFMBE Proceedings 57, 2016
-
Y. Parpottas, I. Chrysanthou, A.
Lontos, Characterization of attenuation and respiratory motion
artifacts and their influence on SPECT MP image evaluation using a
dynamic phantom assembly with variable cardiac defects, Journal of
Nuclear Cardiology, Springer ISSN 1071-3581, 2016
-
A. Tsouknidas, S. Savvakis, Y. Asaniotis,
K. Anagnostidis, A. Lontos, N. Michailidis, The effect of
kyphoplasty parameters on the dynamic load transfer within the
lumbar spine considering the response of a bio-realistic spine
segment, Clinical Biomechanics, Elsevier, Clinical Biomechanics vol.
28, pp. 949–955, 2013 (Clinical Biomechanics Award of the
International Society of Biomechanics I.S.B. The distinction relates
to the research paper as one of the three finalists worldwide. The
research paper was based on the Post Doctorate work of Dr. A.
Tsouknidas).
-
Tsouknidas A., Savvakis S., Tsirelis N.,
Lontos A., Michailidis N., A Non-Linear Finite Element Model
For Assesment Of Lumbar Spinal Injury Due To Dynamic Loading,
International Conference on Bioinformatics Models, Methods and
Algorithms (BIOINFORMATICS), pp. 237-241, Barcelona, Spain, 2013
-
Varitis E., Sagris D., David C.,
Lontos A., Directional Variation Of Trabecular Bone In The
Femoral Head, a μ-CT Based Approach, International Conference on
Bioinformatics Models, Methods and Algorithms (BIOINFORMATICS, pp.
292-295, Barcelona, Spain, 2013
-
K. Efstathiou, A. Lontos, G.
Demosthenous, F. Soukatzidis, M. Pappa, N. Michailidis, Performance
of Coated Dies in Hot Extrusion of Aluminum, Journal of the Balkan
Tribological Association, Vol. 18, No 1, pp. 1–17, 2012
-
A. Lontos, G. Demosthenous, Ch.
Athanasiou, Reproduction of archaeological findings by means of
rapid prototyping technology, laser scanning and the use of
appropriate software, Proceedings of the 11th Biennial Conference On
Engineering Systems Design And Analysis, ESDA2012, July
2-4, 2012, Nantes, France
-
A. Tsouknidas, D. Kountouras, S.
Maropoulos, E. Pavlidou, A. Lontos, Dual-energy X-ray
absorptiometry as an indicator for fragility fracture risks of the
femoral neck, International Conference on Health Informatics (Healthinf
2012), Vilamoura Algarve, Portugal, February 1-4, 2012
-
A. Tsouknidas, A. Lontos, S.
Savvakis, N. Michailidis, Nonintrusive 3D Reconstruction of Human
Bone Models to Simulate their Bio-mechanical Response, 3D Research
Journal (In press), Springer ISSN: 2092-6731, 2012
-
S. Omirou, S. Rossides, A. Lontos,
A new CNC turning canned cycle for revolved parts with free-form
profile, The International Journal of Advanced Manufacturing
Technology, Vol. 60, Issue 1, pp. 201-209, 2012
-
Α. Lontos, G. Demosthenous, F.
Soukatzidis, Application Of Appropriate Coatings On Extrusion Dies
And Evaluation Of Their Performance During Hot Extrusion Of
Aluminum, Proceedings of the ASME 2010 10th Biennial Conference on
Engineering Systems Design and Analysis, ESDA2010, July 12-14, 2010,
Istanbul, Turkey
-
A. Lontos,
K.-D. Bouzakis, G. Demosthenous, Experimental tests and application
of FEM simulation in the hot extrusion of aluminum Using Coated Dies
With Different Geometry, Accepted for presentation in “Tenth
International Conference on Plasma Surface Engineering”,
PSE 2006
,
Garmisch-Partenkirchen, Germany, September 10 - 15, 2006.
-
A. Lontos, K.-D. Bouzakis, G. Demosthenous, A. Baldoukas, FEM
Simulation Of The Whole Circle Of Aluminum Hot Extrusion Using
Circular Dies With Different Extrusion Angle,
Accepted for presentation,
8th Biennial ASME
Conference on Engineering Systems Design and Analysis, ESDA 2006 4 -
7 July, 2006.
-
D.
Karataglis, G. Kapetanos, A. Lontos, A. Christodoulou, J.
Christoforides, J. Pournaras, The role of the dorsal vertebral
cortex in the stability of transpedicular screws, A Biomechanical
Study In Human Cadaveric Vertebrae, The Journal Of Bone And Joint
Surgery, Vol. 88-B, No. 5, pp. 692-695, 2006
-
K.-D. Bouzakis, A. Lontos, Evaluation of Microindentation
Test Results Using FEM Simulations for the Determination of the
Mechanical Properties of Various Ferrous or Non Ferrous Materials,
Proceedings of WTC2005, World Tribology Congress III, ASME,
September 12-16, 2005, Washington, D.C., USA.
-
I.
Tsiafis, K-D. Bouzakis, N. Michailidis, A. Lontos, I.
Anastopoulos, Experimental-analytical procedures to determine the
performance of epoxy resins, under various mechanical loadings,
Journal of Balkan Tribological Association, Vol. 10 No. 1, pp 60-72,
2004.
-
I.
Tsiafis, K-D. Bouzakis, N. Michailidis, A. Lontos, I.
Anastopoulos, Mechanical properties determination of various epoxy
resins by means of nanoindentations, Journal of Balkan Tribological
Association, Vol. 10 No. 1, pp 73-80, 2004.
-
K.-D. Bouzakis, A. Lontos, Creep behaviour determination of
monolayer plasma sprayed coatings under dynamic or static loads,
Surface and Coatings Technology vol. 174 –175, pp. 1053 –1058, 2003.
-
K.-D. Bouzakis, A. Lontos, N. Michailidis , O. Knotek , E.
Lugscheider , K. Bobzin , A. Etzkorn, Determination of mechanical
properties of electron beam-physical vapor deposition-thermal
barrier coatings (EB-PVD-TBCs) by means of nanoindentation and
impact testing,
Surface and Coatings Technology, vol. 163-164, pp. 75-80, 2003.
-
K.-D. Bouzakis, S. Mitsi, G. Mansour, A. Lontos, Dynamical
behavior oh planar cam mechanism using a cam coated with the aid of
plasma spray method, Journal of Balkan Tribological Association,
Vol. 8 No 3, pp. 164-171, 2002.
-
K.-D. Bouzakis, A. Lontos, K. David, V. Kechagias, Creep
behaviour prediction and optimum design of plasma sprayed coatings
with intermediate bonding layer, Surface & Coatings Technology, vol.
142-144, pp. 283-289, 2001.
-
K.–D. Bouzakis, N. Michailidis, A. Lontos, A. Siganos, S.
Hadjiyiannis, G. Giannopoulos, G. Maliaris, T. Leyentecker, G.
Erkens, Coating dynamic cohesion, adhesion and creep properties
characterization through the impact tester, International Magazine
for Metallkunde, vol. 92, pp. 1180-1185, 2001.
-
K.-D. Bouzakis, N. Vidakis, A. Lontos, Implementation of
coating life time prediction in commercial hybrid bearing
catalogues, Journal of Balkan Tribological Association, Vol. 7 No 3,
pp. 166-177, 2001.
-
K.-D. Bouzakis, A. Lontos, N. Vidakis, K. David, V. Kechagias,
Determination of creep behaviour of monolayer thick plasma sprayed
coatings, by means of the impact test and an analytical FEM
supported evaluation procedure, Thin Solid Films, vol. 377-378, pp.
373-381, 2000.
-
K.-D. Bouzakis, N. Vidakis, A. Lontos, S. Mitsi, K. David,
Implementation of low temperature deposited coating fatigue
parameters in commercial roller bearings catalogues, Surface and
Coatings Technology, vol. 133-134, pp. 489-496, 2000.
|
PAPERS IN INTERNATIONAL
PROCEEDINGS |
-
S. Omirou, M. Fyrillas, A. Lontos,
Dynamic deep hole drilling on CNC milling machines, Submitted for
presentation to “The 4th International Conference on Manufacturing
Engineering and Process (ICMEP 2015)”, April 13-14, Paris-France,
2015
-
A. Lontos, Y.
Parpottas, I. Chrysanthou, Construction of silicon rubber lungs by
means of aluminum dies for simulating respiratory in a phantom, 4th
International Conference of Engineering Against Failure, Special
Topic “"Biomaterials properties and applications" ICEAF IV, 24 - 26
June 2015, Skiathos, Greece -
Y. Parpottas, I. Chrysanthou, A. Antoniou, A.
Lontos, O. Demetriadou, L. Livieratos, I. Polycarpou, S.
Christofides, C. Yiannakkaras, D. Kaolis, Construction of a
respiratory phantom to study SPECT MPI under the influence of
respiratory motion, 8th International Conference on
Radiopharmaceutical Therapy (ICRT2013-WARMTH), 17-21 Nov 2013,
Manila, Philippines. -
A. Tsouknidas, G. Maliaris, S. Savvakis, A. Lontos,
N. Michailidis, Compressive response of trabecular
structures, simulated by stress-strain curves of equivalent bulk
structures, 5th International Conference on Manufacturing
Engineering (ICMEN), 1-3 October 2014, Thessaloniki, Greece -
A. Tsouknidas, S. Savvakis,
K. Anagnostidis, Y. Asaniotis, A. Lontos,
N. Michailidis, “Finite Element Based Implant Optimization and
Preoperative Preparation”, Beta Cae Systems S.A. 5th Ansa & Μeta
International Conference, June 5-7, 2013, The Met Hotel,
Thessaloniki, Greece -
A. Tsouknidas, D. Kountouras, S.
Maropoulos, E. Pavlidou, A. Lontos, Dual-energy X-ray
absorptiometry as an indicator for fragility fracture risks of the
femoral neck, International Conference on Health Informatics (Healthinf
2012), Vilamoura Algarve, Portugal, February 1-4, 2012
-
K. Efstathiou, A. Lontos,
N. Michailidis, Performance of coated dies in hot extrusion of
aluminum, 9th THE “A” Coatings, International Conference,
Thessaloniki-Greece October 3-5,
pp. 183-194, 2011
-
S. Omirou, A. Lontos, High
precision CNC turning of revolved parts with free-form profile, 4th
ICMEN International Conference, Thessaloniki-Greece, October 3-5,
pp. 85-94, 2011
-
I. Chrysanthou-Baustert, Y. Parpottas,
O. Demetriadou, D. Kaolis, A. Lontos, Tissue equivalent heart
defects for quantification of perfusion in nuclear cardiology, EANM
2011, 24th Annual Congress of the European Association of Nuclear
Medicine, Birmingham UK October 15-19, 2011 -
Α. Lontos, F. Soukatzidis, D.
Demosthenous, A. Baldoukas, Application of 3D FEM Simulations In The
Hot Extrusion For Production of Solid Aluminium Products, 4th
International Conference from Scientific Computing to Computational
Engineering (4th IC-SCCE) Athens, Greece, July 7-10, pp. 55-62
(vol.1), 2010 -
A. Lontos, F. Soukatzidis, G.
Demosthenous, A. Baldoukas, Effect of extrusion parameters and die
geometry on the produced billet quality using Finite Elements
Method, 7th «ICMEN», Proceedings of the 3rd International Conference
on Manufacturing Engineering (ICMEN), 1-3 October 2008, Chalkidiki,
Greece, pp. 215-228, 2008 -
S. Kanarachos, G. Demosthenous, A.
Baldoukas, Α. Lontos, Safety performance evaluation of
innovative three stage guardrail system using finite elements
simulation, 3rd International Conference from Scientific Computing to Computational
Engineering (3th IC-SCCE) Athens, Greece, July 9-12, pp. -
(vol.), 2008 -
Α. Baldoukas, F. Soukatzidis, G.
Demosthenous, A. Lontos, Experimental investigation of the
effect of cutting depth, tool rake angle and workpiece material type
on the main cutting force, during turning, Proceedings of the 3rd
International Conference on Manufacturing Engineering (ICMEN), 1-3
October 2008, Chalkidiki, Greece, pp. 47-56, 2008 -
A. Lontos, G. Demosthenous, K.-D.
Bouzakis, K. Efstathiou, Experimental investigation of the
performance of coated dies with different geometries after hot and
cold extrusion of aluminum, 2nd International Conference on
Experiments/Process/System Modelling /Simulation & Optimization, 2nd
IC-EpsMsO, Athens, 4-7 July, 2007, IC-EpsMsO -
A. Lontos,
G.
Demosthenous, Application of Finite Elements Method in the hot
extrusion of aluminum alloy AA6061 using circular dies with
different geometries, 2nd International Conference “From Scientific
Computing to Computational Engineering”, 2nd IC-SCCE Athens, Greece,
5-8 July, 2006.
-
A. Lontos,
K.-D. Bouzakis, G. Demosthenous, A. Baldoukas, Application of 3D FEM
simulation in the hot extrusion of aluminum AA6061 using circular
dies with different geometries, 2nd ICMEN Conference,
Kassandra-Chalkidiki, Greece, October 5-7, 2005.
-
A. Baldoukas, G
Demosthenous, A. Lontos, F.A. Soukatzidis, Cutting force
experimental estimation using strain gauge toolholder, In press in
2nd ICMEN Conference, Kassandra-Chalkidiki, Greece, October 5-7,
2005.
-
K.-D. Bouzakis,
O. Knotek, A. Lontos,
N. Michailidis, E. Lugscheider, K. Bobzin, A. Etzkorn,
Mechanical investigations on Electron Beam-Physical Vapor
Deposition-Thermal Barrier Coatings (EB-PVD-TBCs) by means of
nanoindentation and impact testing, Accepted for oral presentation
in the International Conference on Metallurgical Coatings and Thin
Films, San Diego, USA, April 22-26, 2002.
-
K.-D. Bouzakis,
A. Lontos, Creep behaviour determination of
monolayer plasma sprayed coatings under dynamic or static loads,
8th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen, September 9-13, 2002.
-
K.-D. Bouzakis, N. Vidakis,
A. Lontos, S. Mitsi, K. David,
Implementation of low temperature deposited coating fatigue
parameters in commercial roller bearings catalogues, 3rd
International Conference “THE” Coatings in Manufacturing
Engineering, Thessaloniki, 28 - 29 November, pp. 191-203, 2002.
-
K.-D. Bouzakis, S. Mitsi, G. Mansour,
A. Lontos, Dynamical
behaviour of planar cam mechanism using a cam coated with the aid of
plasma spray method, 3rd International Conference “THE”
Coatings in Manufacturing Engineering, Thessaloniki, 28 - 29
November, pp. 225-231, 2002.
-
K.-D. Bouzakis,
A. Lontos, A. Tsouknidas, Determination of
the stress-strain curve of substrate and plasma sprayed coating
materials through a FEM supported evaluation of microindentation
test results, 3rd International Conference “THE” Coatings
in Manufacturing Engineering, Thessaloniki, 28 - 29 November, pp.
365-372, 2002.
-
K.-D. Bouzakis,
A. Lontos, N. Vidakis, K. David, V. Kechagias,
Determination of creep behaviour of monolayer thick plasma sprayed
coatings, by means of the impact test and an analytical fem
supported evaluation procedure, 3rd International
Conference “THE” Coatings in Manufacturing Engineering, Thessaloniki,
28 - 29 November, pp. 383-394, 2002.
-
K.-D. Bouzakis,
A. Lontos, Creep behaviour determination of
monolayer plasma sprayed coatings under dynamic or static loads, 3rd
International Conference “THE” Coatings in Manufacturing
Engineering, Thessaloniki, 28 - 29 November, pp. 395-406, 2002.
-
K.-D. Bouzakis, N. Michailidis,
A. Lontos, A. Siganos, S.
Hadjiyiannis, G. Giannopoulos, G. Maliaris, G. Erkens,
Characterization of cohesion, adhesion and creep properties of
dynamically loaded coatings thought the impact tester, 1st
International Conference on Manufacturing Engineering ICMEN,
Halkidiki, 3-4 October, pp. 491-501, 2002.
-
K.-D. Bouzakis,
A. Lontos, N. Michailidis, O. Knotek, E.
Lugscheider, K. Bobzin, A. Etzkorn, Determination of mechanical
properties of Electron Beam-Physical Vapor Deposition-Thermal
Barrier Coatings (EB-PVD-TBCs) by means of nanoindentation and
impact testing, 1st International Conference on
Manufacturing Engineering ICMEN, Halkidiki, 3-4 October, pp.
513-523, 2002.
-
K-D. Bouzakis, Ι. Τsiafis,
A. Lontos, N. Michailidis, I.
Anastopoulos, M. Kalogirou, O. Friderikos, Study of mechanical
properties of various epoxy resin types, by means of macro
indentations and its FEM simulation, 1st International
Conference on Manufacturing Engineering ICMEN, Halkidiki, 3-4
October, pp. 525-541, 2002.
-
K-D. Bouzakis, G. Maliaris, A. Tsouknidas,
A. Lontos, FEM
simulation of induction heating of aluminum specimens for
thixoforming processes, 1st International Conference on
Manufacturing Engineering ICMEN, Halkidiki, 3-4 October, pp.
617-624, 2002.
-
K.-D. Bouzakis, N. Vidakis,
A. Lontos, S. Mitsi, K. David,
Implementation of low temperature deposited coating fatigue
parameters in commercial roller bearings catalogues, 1st
International Conference on Manufacturing Engineering ICMEN,
Halkidiki, 3-4 October, pp. 777-788, 2002.
-
Α.
Lontos,
V. Kechagias, Creep behaviour prediction and layer thickness
optimization of multilayer plasma sprayed coatings, operating under
dynamic loads, 2nd International Conference “THE Coatings” in
Manufacturing Engineering, Hannover, May 9-10, pp. C1-1 C1-10,
2001.
-
K.-D. Bouzakis, N. Vidakis,
A. Lontos, S. Mitsi, K. David,
Implementation of low temperature deposited coating lifetime
parameters in commercial catalogues of roller bearings.
International Conference ICMCTF 2000, San Diego, California, USA,
April 10-14, 2000.
-
K.-D. Bouzakis,
A. Lontos, N. Vidakis, K. David, V. Kechagias,
Determination of creep behaviour of monolayer thick plasma sprayed
coatings, by means of the impact test and an analytical FEM
supported evaluation procedure. International Conference ICMCTF
2000, April 10-14, San Diego, California, USA, 2000.
-
K.-D. Bouzakis,
A. Lontos, V. Kechagias, Determination of
creep and fracture mechanisms of multilayer thick coatings produced
through the plasma spray method, by means of the impact tester, 7th
International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen, September 17-21, 2000.
-
O.
Knotek, K.-D. Bouzakis, K. David, A. Lontos, N. Michailidis,
A. Siganos, T. Leyendecker, G. Erkens, Control of adhesion and
structure of PVD wear resistant coatings by an improved impact
tester, Plasma Surface Engineering (PSE), Garmisch-Partenkirchen,
Conference September 17-21, 2000.
-
K.-D. Bouzakis, N. Vidakis,
A. Lontos, S. Mitsi,
Implementation of low temperature deposited coating fatigue
parameters in commercial roller bearings catalogues, The First
International Tribology Conference, Jerusalem Israel, 8-9 November,
2000.
-
K.-D. Bouzakis, N. Vidakis, K. David, N. Michailidis,
A. Lontos,
Fatigue of thin-hard coatings applied to cutting tools, Proceedings
of the Third International Conference for Mesomechanics, Editor G.C.
Sih, Tsingua University Press Beijing 100084, P. R. China, vol. II,
pp. 567-578, 2000.
-
K.-D. Bouzakis, N. Vidakis,
A. Lontos, A CAE supported ball
indentation method for the stress strain curves of hard materials,
such as hardened and high speed steels, 6th ICTP International
Conference on Technology of Plasticity, Nuremberg, Germany,
September 19-24, Vol. III, pp. 1293-1300, 1999.
-
K.-D. Bouzakis,
A. Lontos, N. Vidakis, K. David, V. Kechagias,
Determination of mechanical properties of thick coatings producted
by the plasma spray method, 1st International Conference “THE”
Coatings, Thessaloniki, 14-15 October, pp. 269-282, 1999.
-
K.-D. Bouzakis, N. Vidakis,
A. Lontos, Implementation of
coating life time prediction in commercial hybrid bearing
catalogues, 3rd International Conference of Tribology“ Balkantrib’
99 “,Sinaia – Romania, 2-4 June, vol. II, pp. 163-174, 1999.
-
K.-D. Bouzakis, N. Vidakis,
A. Lontos, Study of a linear
contact coating RCF test rig, 3rd International Conference of
Tribology “ Balkantrib’ 99 “, Sinaia – Romania, 2-4 June, vol. III,
pp. 303-314, 1999.
-
K.-D. Bouzakis, N. Vidakis, S. Mitsi,
A. Lontos, Enhancement
of machine tool spindle performance through hybrid bearings with low
temperature PVD coated rings, 1st International Conference “THE”
Coatings, Thessaloniki, 14-15 October, pp. 503-520, 1999.
-
K.-D. Bouzakis, A. Michailidis, N. Vidakis, V. Bakolas, A. Siganos,
A. Lontos, N. Drivakos, The influence of the substrate
roughness on the stress distribution in PVD coated hybrid bearings,
1st International Conference “THE” Coatings, Thessaloniki, 14-15
October, pp. 521-530, 1999.
-
K.-D. Bouzakis, V. Vidakis,
A. Lontos, The rolling contact fatigue
performance of PVD coated systems using linear and point contact
test rings, 1st International Conference “THE” Coatings,
Thessaloniki, 14-15 October, pp. 547-558, 1999.
|
PAPERS IN NATIONAL
PROCEEDINGS |
-
K. Efstathiou, A. Lontos,
N. Michailidis, Performance of coated dies in hot extrusion of
aluminum, 9th Annals Machine Tools Manufacturing Processes,
Thessaloniki-Greece October 3-5,
pp. 463-464, 2011
-
Α. Λόντος, Γ. Δημοσθένους, Σ.
Ρωσσίδης, Κ.-Δ. Μπουζάκης, Κ. Ευσταθίου, Ν. Μιχαηλίδης, Φ.
Σουκατζίδης, Εφαρμογή και αξιολόγηση σκληρών επιφανειακών
επικαλύψεων σε χαλύβδινες μήτρες διέλασης με σκοπό την αύξηση της
διάρκειας ζωής τους, 4o Πανελλήνιο Συνέδριο Μεταλλικών Υλικών,
Κέντρο Διάδοσης Επιστημών & Μουσείο Τεχνολογίας ΝΟΗΣΙΣ, Θεσσαλονίκη,
Ελλάδα, 4-5 Νοεμβρίου, σελ.
467-472, 2010.
-
A. Λόντος, Γ. Δημοσθένους, Κ.-Δ.
Μπουζάκης, Γ. Σκορδάρης, Πειραματική διερεύνηση της απόδοσης
επικαλυμμένων με PVD μητρών, κατά τη θερμή και ψυχρή διέλαση
αλουμινίου, The Cyprus Journal of Science and Technology, Frederick
Research Centre, Vol. 5 (No 2), pp.107-120, 2006.
-
S.
Omirou, A. Lontos, G. Demosthenous, Parametric Programming -
A Powerful CNC Programming Tool, The Cyprus Journal of Science and
Technology, Frederick Research Centre, Vol. 5 (No 1), pp.16-32,
2006.
-
S. Kanarachos, G.
Demosthenous, A. Lontos, Evaluation of a beam damage
identification method based on a crack 1D Finite Element Model, The
Cyprus Journal of Science and Technology, Frederick Research Centre,
Vol. 5 (No 1), pp. 5-15, 2006.
-
A. Lontos,
K.-D. Bouzakis, G. Demosthenous, A. Baldoukas, Hot extrusion of
aluminum AA6061 and application of 3D FEM simulation using circular
dies with different geometry, The Cyprus Journal of Science and
Technology, Frederick Research Centre, Vol. 4 (No 4), pp. 71-80,
2005.
-
A. Λόντος,
Κ.-Δ. Μπουζάκης, Γ. Δημοσθένους, Α. Μπαλντούκας, Προσδιορισμός της
καμπύλης τάσης - παραμόρφωσης μεταλλικών υλικών, μέσω της
αξιολόγησης αποτελεσμάτων διείσδυσης σφαιρικών εισβολέων και
κατάλληλου προσομοιωτικού μοντέλου (FEM), 2o
Πανελλήνιο
Συνέδριο Μεταλλικών Υλικών, ΕΜΠ, Αθήνα, 25-26 Νοεμβρίου, σελ.
445-450, 2004.
-
Α. Μπαλντούκας, Γ.
Δημοσθένους, Δ. Μανωλάκος, Π. Κωστάζος, Α. Λόντος, Κ.
Κοντουργιώτης, Πειραματική και υπολογιστική διερεύνηση του μηχανισμό
παραμόρφωσης παρεμβλημάτων μεταλλικών στηθαίων ασφάλειας με στόχο το
σχεδιασμό βελτιωμένων μορφών, 2o
Πανελλήνιο Συνέδριο Μεταλλικών Υλικών, ΕΜΠ, Αθήνα, 25-26 Νοεμβρίου,
σελ. 163-168, 2004.
-
Κ.-Δ. Μπουζάκης,
Α. Λόντος, Ν. Βιδάκης, Σ. Μήτση, Προσδιορισμός της διάρκειας
ζωής εδράνων κύλισης με κυλινδρικά στοιχεία κύλισης και χαλύβδινους
δακτυλίους με σκληρές
PVD
στοιβάδες, χρησιμοποιούμενα σε υψηλόστροφους ατράκτους
εργαλειομηχανών, Περιοδικό Ανάλεκτα, υπό δημοσίευση, 2003.
-
Κ.-Δ. Μπουζάκης,
Α. Λόντος, Προσδιορισμός της συμπεριφοράς σε ερπυσμό και
βελτιστοποίηση των επικαλύψεων που παράγονται με την μέθοδο θερμικού
ψεκασμού, που λειτουργούν κάτω από δυναμικά φορτία, Περιοδικό
Ανάλεκτα, υπό δημοσίευση, 2003.
-
Κ.-Δ. Μπουζάκης,
Α. Λόντος, Ν. Βιδάκης,
K.
Δαυίδ, Β. Κεχαγιάς, Προσδιορισμός της συμπεριφοράς σε ερπυσμό των
μονοστρωματικών
plasma
sprayed
επικαλύψεων, μέσω του δοκιμαστηρίου κρούσης και της αναλυτικής
μεθόδου των πεπερασμένων στοιχείων (FEM),
Πρακτικά 6ου Συνεδρίου «Εργαλειομηχανές – Μηχανουργικές Κατεργασίες»
Θεσσαλονίκη, 3-4 Οκτωβρίου, σελ. 377-388, 2002.
-
Κ.-Δ. Μπουζάκης,
Α. Λόντος, Β. Κεχαγιάς, Προσδιορισμός συμπεριφοράς κρουστικού
ερπυσμού και βελτιστοποίηση πάχους θερμικού ψεκασμού πλάσματος
πολυστρωματικών επικαλύψεων, Πρακτικά 6ου Συνεδρίου «Εργαλειομηχανές
– Μηχανουργικές Κατεργασίες» Θεσσαλονίκη, 3-4 Οκτωβρίου, σελ.
389-398, 2002.
-
Κ.-Δ. Μπουζάκης,
Α. Λόντος, Προσδιορισμός του μηχανισμού του ερπυσμού
μονοστρωματικών θερμικών επικαλύψεων κάτω από δυναμικά η στατικά
φορτία, Πρακτικά 6ου Συνεδρίου «Εργαλειομηχανές – Μηχανουργικές
Κατεργασίες» Θεσσαλονίκη, 3-4 Οκτωβρίου, σελ. 399-410, 2002.
-
K.-Δ.
Μπουζάκης,
A.
Λόντος,
N.
Μιχαηλίδης,
O.
Knotek,
E.
Lugscheider,
K.
Bobzin,
A.
Etzkorn,
Προσδιορισμός των μηχανικών ιδιοτήτων των
Electron
Beam-Physical
Vapor
Deposition-Thermal
Barrier
Coatings (EB-PVD-TBCs)
επικαλύψεων, μέσω του νανοσκληρομέτρου και του δοκιμαστηρίου
κρούσης, Πρακτικά 6ου Συνεδρίου «Εργαλειομηχανές – Μηχανουργικές
Κατεργασίες», Θεσσαλονίκη, 3-4 Οκτωβρίου, σελ. 411-422, 2002.
-
Κ.-Δ. Μπουζάκης, Σ.
Μήτση, Γ. Μανσούρ,
A. Λόντος,
Δυναμική συμπεριφορά επίπεδου μηχανισμού με οδηγητική καμπύλη
επικαλυμμένη μέσω θερμικού ψεκασμού, Πρακτικά 6ου Συνεδρίου «Εργαλειομηχανές
– Μηχανουργικές Κατεργασίες» Θεσσαλονίκη, 3-4 Οκτωβρίου, σελ.
435-442, 2002.
-
Κ.-Δ. Μπουζάκης,
Α. Λόντος, Ν. Βιδάκης, Σ. Μήτση, Προσδιορισμός της διάρκειας
ζωής εδράνων κύλισης χρησιμοποιούμενα σε υψηλόστροφους ατράκτους με
κυλινδρικά στοιχεία κύλισης και χαλύβδινους δακτυλίους,
επικαλυμμένους με σκληρές
PVD
στοιβάδες, Πρακτικά 6ου Συνεδρίου «Εργαλειομηχανές – Μηχανουργικές
Κατεργασίες» Θεσσαλονίκη, 3-4 Οκτωβρίου, σελ. 471-483, 2002.
-
K.-Δ.
Μπουζάκης,
N.
Μιχαηλίδης,
A.
Λόντος,
Α. Σιγανός, Σ. Χατζηγιάννης, Γ. Γιαννόπουλος, Γ. Μάλιαρης,
G.
Erkens, Προσδιορισμός της συνοχής, συνάφειας και ερπυσμού
δυναμικά φορτιζόμενων επικαλύψεων μέσω του δοκιμαστηρίου
επαναλαμβανόμενης κρούσης, Πρακτικά 6ου Συνεδρίου «Εργαλειομηχανές –
Μηχανουργικές Κατεργασίες» Θεσσαλονίκη, 3-4 Οκτωβρίου, σελ. 485-494,
2002.
-
Κ.-Δ. Μπουζάκης,
Α. Λόντος, Γ. Μάλιαρης, Α. Τσουκνίδας, Σχεδιομελέτη κατασκευή
και λειτουργία πειραματικής πνευματικής διάταξης για την διεξαγωγή
πειραμάτων σε δοκίμια ράβδων αλουμινίου σε ημιστερεά μορφή, Πρακτικά
6ου Συνεδρίου «Εργαλειομηχανές – Μηχανουργικές Κατεργασίες»
Θεσσαλονίκη, 3-4 Οκτωβρίου, σελ. 495-506, 2002.
-
Κ.-Δ. Μπουζάκης, Ι.
Τσιάφης, Α. Λόντος, Ν. Μιχαηλίδης, Ι. Αναστόπουλος, Μ.
Καλογήρου, Προσδιορισμός της συμπεριφοράς των εποξικών ρητινών κατά
την καταπόνηση τους με εφελκυστικά και διατμητικά φορτία και έλεγχος
της συναφειακής τους αντοχής, Πρακτικά 6ου Συνεδρίου «Εργαλειομηχανές
– Μηχανουργικές Κατεργασίες» Θεσσαλονίκη, 3-4 Οκτωβρίου, σελ.
507-519, 2002.
-
Κ.-Δ. Μπουζάκης, Ι.
Τσιάφης, Α. Λόντος, Ν. Μιχαηλίδης, Ι. Αναστόπουλος, Μ.
Καλογήρου, Μελέτη των μηχανικών ιδιοτήτων εποξικών συγκολλητικών
ουσιών, μέσω του δοκιμαστηρίου του νανοσκληρομέτρου και της
προσομοίωσης με την βοήθεια της μεθόδου των πεπερασμένων στοιχείων (FEM),
Πρακτικά 6ου Συνεδρίου «Εργαλειομηχανές – Μηχανουργικές Κατεργασίες»
Θεσσαλονίκη, 3-4 Οκτωβρίου, σελ. 521-528, 2002.
-
Κ.-Δ. Μπουζάκης, Ν.
Βιδάκης, Σ. Μήτση, Α. Λόντος, Αύξηση της απόδοσης
υψηλόστροφων ατράκτων εργαλειομηχανών μέσω της χρήσης υβριδικών
εδράνων κύλισης με PVD επικαλύψεις χαμηλών θερμοκρασιών, Μετάδοση
Ισχύος, τεύχος 68, σελ. 24-28, 2001.
-
K.-Δ. Μπουζάκης,
A. Λόντος, N. Βιδάκης, K. Δαυίδ, Β. Κεχαγιάς, Προσδιορισμός
μηχανικών ιδιοτήτων επικαλύψεων κατασκευασμένων μέσω ψεκασμού
πλάσματος, Πρακτικά 5ου Συνεδρίου «Εργαλειομηχανές – Μηχανουργικές
Κατεργασίες» Θεσσαλονίκη, 2-3 Δεκεμβρίου, σελ. 275-290, 1999.
-
K.-Δ. Μπουζάκης, N.
Βιδάκης, Σ. Μήτση, A. Λόντος, Αύξηση της απόδοσης
υψηλόστροφων ατράκτων εργαλειομηχανών μέσω της χρήσης υβριδικών
εδράνων κύλισης με PVD επικαλύψεις χαμηλών θερμοκρασιών, Πρακτικά
5ου Συνεδρίου «Εργαλειομηχανές – Μηχανουργικές Κατεργασίες»
Θεσσαλονίκη, 2-3 Δεκεμβρίου, σελ. 305-321, 1999.
-
Κ.-Δ. Μπουζάκης, Ν.
Βιδάκης, Α. Λόντος, Α. Igartua, Κατασκευή δοκιμαστηρίου
γραμμικής επαφής που χρησιμοποιείται για τον έλεγχο της συμπεριφοράς
κόπωσης επικαλύψεων σε συνθήκες κύλισης και ολίσθησης, Πρακτικά 5ου
Συνεδρίου «Εργαλειομηχανές – Μηχανουργικές Κατεργασίες» Θεσσαλονίκη,
2-3 Δεκεμβρίου, σελ. 323-332, 1999.
-
K.-Δ. Μπουζάκης, Α.
Μιχαηλίδης, Ν. Βιδάκης, Β. Μπακόλας, Α. Σιγανός, A. Λόντος,
Ν. Δριβάκος, Η επίδραση της τραχύτητας του υποστρώματος στην
κατανομή πίεσης σε επικαλυμμένα υβριδικά έδρανα κύλισης, Πρακτικά 5ου
Συνεδρίου «Εργαλειομηχανές – Μηχανουργικές Κατεργασίες» Θεσσαλονίκη,
2-3 Δεκεμβρίου, σελ. 333-341, 1999.
-
K.-Δ. Μπουζάκης, Ν.
Μιχαηλίδης, Α. Λόντος, Κ. Δαυίδ, Ν. Βιδάκης, Μέθοδος
προσδιορισμού αντοχής σε κόπωση λεπτών σκληρών PVD επικαλύψεων και
τυπικές εφαρμογές της σε κοπτικά εργαλεία και υβριδικά έδρανα
κύλισης, Πρακτικά 5ου Συνεδρίου «Εργαλειομηχανές – Μηχανουργικές
Κατεργασίες» Θεσσαλονίκη, 2-3 Δεκεμβρίου, σελ. 3-22, 1999.
|
PAPER AND FUNDING
PROJECTS REVIEWER |
Evaluator/Reviewer in Research Proposals
-
Independent expert for the evaluation of
Science & Technology proposals submitted to the Greek National call
under the Action “COOPERATION 2011 – Partnerships of Production
and Research Institutions in Focused Research and Technology Sectors,
Greek governmental agency “Special Agency for the Management &
Implementation of Research, Technological Development & Innovation
Actions”, Ministry of Education, Lifelong Learning and Religious
Affairs, 2011-12
-
Research Program “Archimedes III”,
Greek Government, Deputy Minister for Education, Life Long Learning,
and Religious Affairs (Higher Education, Research and Innovation),
Office of the Deputy Minister of Education, responsible for Higher
Education, Research and Technology, 2011
-
Research Program “Thalis”, Greek
Government, Deputy Minister for Education, Life Long Learning, and
Religious Affairs (Higher Education, Research and Innovation),
Office of the Deputy Minister of Education, responsible for Higher
Education, Research and Technology, 2011
-
Assessment of COST Proposals,
COST (Collaboration in the Field of Science and Technology), Domain
for Materials, Physical and Nanosciences (MPNS), First and Second
stage evaluation, Since 2006
Evaluator/Reviewer
in Scientific Papers
-
Paper reviewer for the "Materials
Letters", Elsevier, Prof. Aldo R. Boccaccini (Editor-in-Chief),
Since 2012
-
Paper reviewer for the 2nd International
Symposium on “Design and Research In Artificial and Natural
Sciences, DRANS 2011”, In the context of The 15th World Multi-Conference
on Systemics, Cybernetics and Informatics: WMSCI 2011, 19-22 July
2011 – Orlando, Florida, USA
-
Paper reviewer for the “Journal of
Applied Biomechanics”, ScholarOne Manuscripts, Dr. Don Anderson
(Associate Editor), Since 2011
-
Paper reviewer for the International
Symposium on Design and Research In Artificial and Natural
Sciences, In the context of The World Multi-Conference on
Systemics, Cybernetics and Informatics: WMSCI 2010, June 29th - July
2nd, 2010 – Orlando, Florida, USA
-
Paper reviewer for the International
Journal Materials Science and Engineering: A, Structural
Materials: Properties, Microstructure and Processing, Elsevier,
E. Werner (Editor), Since 2010
-
Paper reviewer for the International
Journal Colloids and Surfaces A: Physicochemical and Engineering
Aspects, Elsevier, Peter Kralchevsky (Editor), Sinve 2010
-
Paper reviewer for the International
Journal Ecological Engineering, Elsevier, William J. Mitsch (Editor-in-Chief),
Since 2010
-
Paper reviewer for the “International
Journal of Mechanical Sciences” Elsevier, Keith Davey (Journal
Editor), Since 2007
|
|

Webpage Design by: Dr. Antonios A. Lontos
Last Modification:
27/01/2017 14:00 |
|
|