2017-21 |
COST Action CA16122, Biomaterials
and advanced physical techniques for regenerative cardiology and
neurology (BIONECA). MC Member. |
2016-19 |
E.U. Structural Funds and the
Republic of Cyprus, under the Operational Programme 2014-2020 -
Competitiveness and Sustainable Development - Scheme for the
Support of Business Innovation - Development of Innovative
Products, Services and Processes, of the Ministry of Energy,
Commerce, Industry and Tourism. Budget €75000. Project “Hippoactive”,
L.K. RehabTech Ltd, Frederick University. |
2016-18 |
E.U. Structural Funds and the
Republic of Cyprus, under the Operational Programme 2014-2020 -
Competitiveness and Sustainable Development - Scheme for the
Support of Business Innovation - Development of Innovative
Products, Services and Processes, of the Ministry of Energy,
Commerce, Industry and Tourism. Budget €470000. Project
“Certification of a new type of wind turbine”, O.G.T Greentech
Ltd, Kassinis International Consulting Ltd, Frederick
University. |
2012-15 |
Project title: FEM supported determination of the
biomechanical response of the human spine considering all
muscelo-sceletal characteristics, Acronym: BioSpine, Project ID:
3227, Greek Ministry of Education, Lifelong Learning and
Religious Affairs, "Support of Postdoctoral Researchers",
Sub filed: PE8 (Materials engineering, biomaterials, metals,
ceramics, polymers, composites), Hellenic Host: Aristotle
University of Thessaloniki, International Host: Frederick
University, Budget €150.000. |
2012-14 |
"Optimizing the diagnostic value of
SPECT myocardial perfusion images under the influence of
respiratory motion", Βελτιστοποίηση της διαγνωστικής αξίας
εξετάσεων αιμάτωσης μυοκαρδίου με υπολογιστική τομογραφία
εκπομπής φωτονίων υπό την επίδραση της αναπνοής, Cyprus Research
Promotion Foundation, YΓΕΙΑ/ΔΥΓΕΙΑ/0311(ΒΙΕ)/27,
€179.520 |
2011 - 13 |
«Design
and development of a low permeability measuring system for
construction materials,
Σχεδιασμός
και Ανάπτυξη Συσκευής Προσδιορισμού της Διαπερατότητας Δομικών
Υλικών Χαμηλού Πορώδους»,
ΕΠΙΧΕΙΡΗΣΕΙΣ/ΠΡΟΪΟΝ/0609/112, Έρευνα για Επιχειρήσεις, ΔΕΣΜΗΣ
2009-2010,
€145.700 |
2010 - 11 |
«Increase of the passive safety of
cars for the protection of pedestrians by Crash Resistant
Adhesive Bonding of attachments on LACquered Surfaces (CRAB LACS)», CORNET II/0809/01,
Host Organization: Technical University of
Braunschweig,
€135.000 |
2006 - 08 |
«Ανάπτυξη
καινοτόμων υπολογιστικών και πειραματικών διαδικασιών με σκοπό
τον χαρακτηρισμό της απόδοσης των λεπτών επιφανειακών
επικαλύψεων», Ακρωνύμιο
" ΧΑΡΥΜΕΝΩΝ", ΤΕΧΝΟ/0506/14, Ίδρυμα
Προώθησης Έρευνας, Προϋπολογισμός έργου
€130.350 |
2006
- 08 |
«Αύξηση της διάρκειας ζωής των μητρών διέλασης υψηλών
προδιαγραφών προφίλ αλουμινίου μέσω της εφαρμογής σύχρονων και
καινοτόμων μεθοδολογιών», Ακρωνύμιο "ΣΥΜΗΤΡεΔΙ",
Ίδρυμα Προώθησης Έρευνας, ΑΚΙΠΕ/0506/06,
Προϋπολογισμός έργου
€130.680
(CYP 81.795) |
2006
- 08 |
«Ανακατασκευή αρχαιολογικών ευρημάτων μέσω τομογραφιών
υποστηριζόμενων από Η/Υ και μεθόδους ταχείας πρωτοτυποποίησης»
- «Reconstruction
of Archaeological Findings by Computer Tomographies and Rapid
Prototyping Methods»,
Ακρωνύμιο "ARAPICO",
ΕURΕΚΑ
(E!3881 FACTORY ARAPICO), EUREKA
Κύπρου - EUΥΦΙ/0506/02,
Προϋπολογισμός έργου
€86.190, (CYP
60.000) |
2006 - 08 |
«Καινοτόμες Δράσεις στο Πεδίο του Εργαστηριακού και Λειτουργικού
Χαρακτηρισμού Λεπτών Επικαλύψεων και άλλων Σκληρών Προηγμένων
Υλικών Βιομηχανικών Εφαρμογών» - «Innovative research Actions in
the field of laboratorial and operational characterization
of thin hard coatings and other advanced hard materials used in
industrial applications»,
Acronym "Thin
Is In", Πρόγραμμα κοινοτικής πρωτοβουλίας
INTERREG IIIA
/ Ελλάδα – Κύπρος 2000-2006, Μέτρο 2.3
«Συνεργασία Εκπαιδευτικών και Ερευνητικών Ιδρυμάτων», Υπουργείο
Οικονομίας και Οικονομικών Ελλάδας,
Γραφείο Προγραμματισμού Κύπρου,
Προϋπολογισμός έργου
€305.000 , (93.000
€) |
2005 - 09 |
Design of a new
high surface hardness and complicated geometry die for the
extrusion of high accuracy aluminum profiles», Cyprus Research
Promotion Foundation, ΕΡΥΑΝ/0105/19,
Funding CYP 100.000 |
2005 - 07 |
«New guardrail
system design for the improvement of vehicle
crash safety», Cyprus Research
Promotion Foundation, ΑΚΙΠΕ/1204/03,
Funding: CYP 60000 |
2004 - 07 |
«New Guardrail System Design for
Critical Collision Cases in Cyprus Highways», Cyprus Research
Promotion Foundation, Funding CYP 75000 |
2004 - 06 |
«Design and manufacturing of
fiber-reinforced composite high-pressure pipes capable for
corrosion liquids», Cyprus Research Promotion Foundation,
Funding CYP 50000 |
2004 - 06 |
«Improvement of aluminum (AA6063)
extrusion using new hard coatings on the surface of the
extrusion dies» Cyprus Research Promotion Foundation, Funding
CYP 35000 |
2000 - 01 |
«Construction of an inductive
computer based device for the electromagnetic heating of special
aluminum specimens» Prof. K.-D. Bouzakis, Duration 3/2002 since
6/2003 |
2000 - 01 |
«Study of various epoxy resins in
mechanical components» Ass. Prof.
Ι. Tsiafis,
Duration 2/2000 since 8/2001 |
1998 - 00 |
«Determination of the fatigue life
of hard mono and multi layer coatings produced by means of
thermal spray method», Prof. K.-D. Bouzakis, Program duration
12/1998 since 12/2000 |
|
-
Invited by the European Commission to
the "Country-focused Workshop on promoting employability through
higher education", European Commission, Directorate General for
Education and Culture, Higher Education, Erasmus, Silken Berlaymont
Hotel, 2-3 February 2015, Brussels, Belgium
-
Organization of a Training School, COST
Action NAMABIO MP1005, 4th Course, "From nano- to macro-
biomaterials (design, processing, characterization, modeling) and
applications to stem cells regenerative orthopaedic and dental
medicine", Frederick University, 14 – 17 October 2014, Frederick
University, Nicosia, Cyprus
-
COST meeting (National Representative),
8th Annual Progress Conference (APC) in conjunction with the 9th DC
meeting of the new mandate and oc-2013-1 Open Call Hearings, 9-11
September 2014, Heraklion, Greece
-
Visit at Aristotle University of
Thessaloniki for collaboration in the frame of Postdoctoral Research
"FEM supported determination of the biomechanical response of the
human spine considering all muscelo-sceletal characteristics" Greek
Ministry of Education, Lifelong Learning and Religious Affairs,
"Support of Postdoctoral Researchers", Hellenic Host: Aristotle
University of Thessaloniki, International Host: Frederick
University, 26-28 May 2014, Thessaloniki, Greece
-
COST meeting (National Representative),
COST MPNS 8th DC meeting and oc-2013-2 Hearings, 10- 11 March
2014, Brussels, Belgium
-
Cost Action Rapporteur, 1st General Work
Group and MC Meeting, COST Action MP1206, Electrospun Nano-fibres
for bio inspired composite materials and innovative industrial
applications, 3-4 December 2013, London, UK
-
COST meeting (National Representative),
7th Annual Progress Conference (APC) in conjunction with the DC Open
Call Hearings, COST MPNS, 9-13 September 2013, Reykjavik, Iceland
-
Meeting with Industry Liaison Offices in
UK (Imperial College of London) and Latvia (Riga Technical
University), 10-12 June 2013, London UK and Riga Latvia
-
Participation in conference, «5th ANSA &
μETA International Conference», The Med Hotel, 4-7 June 2013,
Thessaloniki, Greece
-
COST Action Rapporteur, 1st Management
Committee of COST Action MP1206, Electrospun Nano-fibres for bio
inspired composite materials and innovative industrial applications,
23 May 2013, Brussels, Belgium
-
COST meeting (National Representative),
COST MPNS 6th DC meeting and oc-2012-2 Hearings, 11-12 March
2013, Brussels, Belgium
-
Participation and papers presentation,
International Conference on Bioinformatics Models, Methods and
Algorithms (BIOINFORMATICS), 11–14 February 2013, Barcelona,
Spain
-
Participation as Expert, Cyprus
Presidency Conference titled "EIT Stakeholders Conference –
Addressing Societal Challenges through the EIT", Research Promotion
Foundation of Cyprus (RPF), European Commission Lifelong Learning
Programme, European Institute of Innovation and Technology (EIT),
Knowledge and Innovation Communities (KICs), 8-9 November 2012,
Larnaca, Cyprus
-
Participation and paper presentation,
9th International Congress "MACHINES, TECHNOLОGIES, MATERIALS 2012",
18-22 September 2012, Varna – Bulgaria
-
COST meeting (National Representative),
6th Annual Progress Conference in conjunction with the 5th DC
meeting of the new mandate and oc-2012-1 Open Call Hearings,
Conference and Events Centre, Royal College of Physicians, 11–13
September 2012, Dublin, Ireland
-
COST meeting (National Representative),
4th DC Meeting & oc-2011-2 Hearings, COST Office, Avenue Lousie 149,
B-1050, 15th Floor Brussels, 15–16 March 2012, Brussels, Belgium
-
Participation in the seminar of the
project ΥΓΕΙΑ/ΔΥΓΕΙΑ/0308/11(BIE),
"Optimising Diagnostic Value in
SPECT Myocardial Perfusion Imaging" funded by the Cyprus Research
Promotion Foundation and the European Regional Development Funds.
January 12th of 2012, Frederick University (Nicosia Campus: Seminar
Room 1, 5:00-7:30 pm). 12 January 2012
-
The 9th International "THE" Coatings
Conference, 4th International Conference on Manufacturing
Engineering in Thessaloniki - ICMEN 2011, Balkantrib 11 Conference,
2-5 October 2011, Thessaloniki - Greece
-
5th Annual Progress Conference (APC) in
conjunction with the 3rd DC meeting of the new mandate and Open Call
Hearings, COST (European Cooperation in Science and Technology),
13-15 September 2011, Tartu - Estonia
-
Πανεπιστήμιο Frederick,
Σεμινάριο με οργανωτή το Τμήμα Μηχανολόγων Μηχανικών και ομιλητή τον
Επίκουρο Καθηγητή, Δρ Αντώνη Λόντο, με θέμα: "Μηχανικές Ιδιότητες
Σκληρών Επικαλύψεων και Εφαρμογές στη Βιομηχανία",
10 Μαΐου 2011, Λευκωσία-Κύπρος
-
2nd DC Meeting & oc-2010-2 Hearings,
3rd and 4th March 2011, COST (European Cooperation in Science and
Technology), Fondation Universitaire, rue d’Egmont 11, 1000
Brussels, 3-4 March 2011, Brussels – Belgium
-
4o Πανελλήνιο Συνέδριο Μεταλλικών Υλικών,
4-5 Νοεμβρίου 2010, Κέντρο Διάδοσης Επιστημών & Μουσείο Τεχνολογίας
ΝΟΗΣΙΣ, Θεσσαλονίκη, 4-7 Νοεμβρίου, Θεσσαλονίκη – Ελλάς
-
4th Annual Progress Conference in
conjunction with the 1st DC meeting of the new mandate and Open Call
Hearings, 8th – 10th Sept. 2010, Berlin, Germany
-
COST MPNS 10th DC meeting and Hearings &
the 3rd Annual Progress Conference (APC), Istanbul Technical
University, SDKM Congress Center, Maslak, 34469, 16-18 Semtember
2009, Istanbul - TURKEY
-
Πρόγραμμα Κοινοτικής Πρωτοβουλίας
INTERREG IIIA ΕΛΛΑΔΑ–ΚΥΠΡΟΣ 2000-2006, «Καινοτόμες Δράσεις στο Πεδίο
του Εργαστηριακού και Λειτουργικού Χαρακτηρισμού Λεπτών Επικαλύψεων
και άλλων Σκληρών Προηγμένων Υλικών Βιομηχανικών Εφαρμογών, (Thin Is
In)», 3-7 Αυγούστου 2009, Ηράκλειο – Κρήτης
-
Συνάντηση συνεργατών στα πλαίσια
ερευνητικού προγράμματος στην Θεσσαλονίκη, 14-16 Απριλίου 2009,
Θεσσαλονίκη – Ελλάδα
-
Συνάντηση συνεργατών στα πλαίσια
ερευνητικού προγράμματος στην Θεσσαλονίκη, 12-15 Μαρτίου 2009,
Θεσσαλονίκη – Ελλάδα
-
Συνάντηση συνεργατών στα πλαίσια
ερευνητικού προγράμματος στην Θεσσαλονίκη, 22-25 Ιανουαρίου 2009,
Θεσσαλονίκη – Ελλάδα
-
Συνάντηση συνεργατών στα πλαίσια
ερευνητικού προγράμματος στην Θεσσαλονίκη, 16-18 Οκτωβρίου 2008,
Θεσσαλονίκη – Ελλάδα
-
7th "THE Coatings" and the 3rd "ICMEN"
International Conference on Manufacturing Engineering (ICMEN), 1-3
October 2008, Chalkidiki, Greece
-
2nd International Conference on
Experiments/Process/System Modelling /Simulation & Optimization, 2nd
IC-EpsMsO, Athens, 4-7 July, 2007
-
2nd International Conference �From
Scientific Computing to Computational Engineering�, 2nd IC-SCCE
Athens, Greece, 5-8 July, 2006
-
Επιχορήγηση από το Groundtvig 3 του
Υπουργείου Παιδείας, Course IT-2006-034, "E-Learning for Interactive
training: Methodologies, tools and best practices", 2-8 Ιουλίου
2006, Bari, Italy
-
Ημερίδα:
"Αεροπορική εκπαίδευση στο
τμήμα τεχνολογίας αεροσκαφών του ΤΕΙ Χαλκίδας - ασφάλεια πτήσεων",
Θέμα διάλεξης: Διερεύνηση μηχανικών ιδιοτήτων σκληρών επιφανειακών
επικαλύψεων, 4-5 Μαΐου 2006, Χαλκίδα - Ελλάς
-
Διάλεξη στο Πανεπιστήμιο Κύπρου,
Πολυτεχνική Σχολή, Τμήμα Μηχανολόγων Μηχανικών και Μηχανικών
Παραγωγής, Θέμα διάλεξης: Μέθοδοι προσδιορισμού των μηχανικών
ιδιοτήτων των λεπτών σκληρών επιφανειακών επικαλύψεων και εφαρμογή
τους σε παραγωγικές διαδικασίες, 3 Μαΐου 2006, Λευκωσία - Κύπρος
-
Visit of Cypriot Researches for
colaboration with "Institute JOZEF STEFAN" and "Intitute of Metals
and Technology", 12 – 13 December 2005, Ljubljana, Slovenia
-
5th International Conference "THE
Coatings in Manufacturing Engineering and EUREKA Partnering Event",
Kassandra - Chalkidiki, Greece, October 5-7, 2005
-
2st International Conference
"Manufacturing Engineering ICMEN and EUREKA Partnering Event",
Kassandra - Chalkidiki, Greece, October 5-7, 2005
-
Quality Assurance in Engineering
Education, Tomsk Polytechnic University, Russia, 1-2 April 12, 2005.
-
2o Πανελλήνιο Συνέδριο Μεταλλικών
Υλικών, Εθνικό Μετσόβιο Πολυτεχνείο, Αθήνα, Νοέμβριος 2004
-
Using LS-DYNA for FEM simulations, Assoc.
Professor Ala Tabie, 23-25 June 2004
-
Σεμινάριο ISO 9000:2000 / Για Εσωτερικές
Επιθεωρήσεις Συστημάτων Διαχείρισης Ποιότητας, Ajax Hotel, 16–17
Μαίου 2003
-
Σεμινάριο ISO 9000:2000 / Για
Επιθεωρητές Συστημάτων Διαχείρισης Ποιότητας, Ajax Hotel, 25 – 29
Ιουνίου 2003
-
3rd International Conference "THE
Coatings in Manufacturing Engineering and EUREKA Partnering Event",
Thessaloniki, Greece, 28 - 29 November 2002
-
1st International Conference
"Manufacturing Engineering ICMEN and EUREKA Partnering Event", Sani,
Halkidiki, Greece, 3-4 October 2002
-
6ο Conference of Laboratory of Machine
Tools and Manufacturing Engineering «Machine Tools – Manufacturing
Processes», Thessaloniki, Greece, 3-4 October 2002
-
2nd International Conference "THE"
Coatings in Manufacturing Engineering, Hannover-Germany, 9-10 May
2001
-
5ο Conference of Laboratory of Machine
Tools and Manufacturing Engineering «Machine Tools – Manufacturing
Processes», Thessaloniki, Greece, 2-3 December 1999
-
1st International Conference "THE"
Coatings in Manufacturing Engineering, Thessaloniki, Greece, 14-15
October 1999
|
Technical reports in the frame of
research programs and projects:
-
Reseach Project, "Κατασκευή σύνθετης
γεωμετρίας και αυξημένης επιφανειακής σκληρότητας μητρών για τη
διέλαση προϊόντων αλουμινίου υψηλής διαστατικής ακρίβειας",
"Construction of dies with enhanced surface hardness and complex
geometry for the extrusion of high performance aluminium products",
"ΣΥΝΔΙΕΛΑΜΙ", Cyprus
Research Promotion Foundation, Final Report, A. Lontos, 2010
-
Research Project, "Ανάπτυξη καινοτόμων
υπολογιστικών και πειραματικών διαδικασιών με σκοπό τον χαρακτηρισμό
της απόδοσης των λεπτών επιφανειακών επικαλύψεων", "Development of
new and innovative computational and experimental methodologies for
the characterization of thin hard coatings performance", "ΧΑΡΥΜΕΝΩΝ",
Cyprus Research Promotion Foundation, Final Report, A. Lontos, 2009
-
Research Project,
"Αύξηση της διάρκειας ζωής των μητρών διέλασης υψηλών προδιαγραφών
προφίλ αλουμινίου μέσω της εφαρμογής σύγχρονων και καινοτόμων
μεθοδολογιών", "Improvement of the working life of aluminium
extrusion dies by means of advance and innovative procedures", "ΣΥΜΗΤΡεΔΙ",
Cyprus Research Promotion Foundation, Final Report, A. Lontos,
2009
-
Research Project, "Ανάπτυξη καινοτόμων
υπολογιστικών και πειραματικών διαδικασιών με σκοπό τον χαρακτηρισμό
της απόδοσης των λεπτών επιφανειακών επικαλύψεων", "Development of
new and innovative computational and experimental methodologies for
the characterization of thin hard coatings performance", "ΧΑΡΥΜΕΝΩΝ",
Cyprus Research Promotion Foundation, Mid Term Report, A. Lontos,
2008
-
Reserch Project "Ανακατασκευή
αρχαιολογικών ευρημάτων μέσω τομογραφιών υποστηριζόμενων από Η/Υ και
μεθόδους ταχείας πρωτοτυποποίησης",
Reconstruction of Archaeological Findings by Computer Tomographies
and Rapid Prototyping Methods»,
"ARAPICO",
ΕURΕΚΑ
E!3881, Final Report, A. Lontos, 2008
-
Research Project,
"Αύξηση της διάρκειας ζωής των μητρών διέλασης υψηλών προδιαγραφών
προφίλ αλουμινίου μέσω της εφαρμογής σύγχρονων και καινοτόμων
μεθοδολογιών", "Improvement of the working life of aluminium
extrusion dies by means of advance and innovative procedures", "ΣΥΜΗΤΡεΔΙ",
Cyprus Research Promotion Foundation, Mid Term Report, A.
Lontos, 2008
-
Reseach Project, "Κατασκευή σύνθετης
γεωμετρίας και αυξημένης επιφανειακής σκληρότητας μητρών για τη
διέλαση προϊόντων αλουμινίου υψηλής διαστατικής ακρίβειας",
"Construction of dies with enhanced surface hardness and complex
geometry for the extrusion of high performance aluminium products",
"ΣΥΝΔΙΕΛΑΜΙ", Cyprus
Research Promotion Foundation, Mid Term Report, A. Lontos, 2007
-
Reserch Project "Ανακατασκευή
αρχαιολογικών ευρημάτων μέσω τομογραφιών υποστηριζόμενων από Η/Υ και
μεθόδους ταχείας πρωτοτυποποίησης",
Reconstruction of Archaeological Findings by Computer Tomographies
and Rapid Prototyping Methods»,
"ARAPICO",
ΕURΕΚΑ
E!3881, Mid Term Report, A. Lontos, 2007
-
Research Project, "Βελτίωση
της διελασιμότητας κράματος αλουμινίου ΑΑ6063 με χρήση επικαλυμμένων
μητρών με νέου τύπου PVD επικαλύψεις", "Improvement
of aluminum (AA6063) extrusion using new hard coatings on the
surface of the extrusion dies",
"ΔΙΕΛΑΛΟΥΜΙ", Cyprus Research Promotion
Foundation, Final Report, A. Lontos, 2006
-
Research Project, "Βελτίωση
της διελασιμότητας κράματος αλουμινίου ΑΑ6063 με χρήση επικαλυμμένων
μητρών με νέου τύπου PVD επικαλύψεις", "Improvement
of aluminum (AA6063) extrusion using new hard coatings on the
surface of the extrusion dies",
"ΔΙΕΛΑΛΟΥΜΙ", Cyprus Research Promotion
Foundation, Mid Term Report, A. Lontos, 2005
-
Program for the development of the
industrial research, ΠΑΒΕ 1996, Program Code 96ΒΕ307 1996-2000,
Determination of the fatigue life of hard mono and multi layer
coatings produced by means of thermal spray method, final report,
K.-D. Bouzakis, A. Lontos, 2000
-
BRITE-EURAM PROJECT (REFINE), 1996-2000,
No. BE 96-3398, Reliable environmental friendly spindle bearings for
high speed applications, 6 mid term reports, K.-D. Bouzakis, N.
Vidakis, A. Lontos
-
Research and Technology project
2000-2001 (ΕΠΕΤ ΙΙ), Program for the supporting of new researches
ΠΕΝΕΔ 99, Program code 99ΕΔ350, Study of various epoxy resins in
mechanical components, final report, Ι. Tsiafis, A. Lontos, 2001
-
Program for the development of the
industrial research and technology ΠΑΒΕΤ 2000, Project "Competitiveness"
(ΕΠΑΝ), Program code 00BE306, Construction of an inductive fully
automated device for the electromagnetic heating of special aluminum
specimens, 4 mid term reports, K.-D. Bouzakis, A. Lontos, 2000
Other technical reports:
-
Technical report "Investigation of
mechanical strength – Connection of valve with elastic pipes by
means of mechanical components", 2002
-
Technical report "Control of mechanical
behavior of the base of chairs which are manufactured by means of
semi solid forming of aluminum", 2002
-
Scientific reports, which concerns the
mechanical behavior of medical instruments that are used for the
recovery of human vertebral, after serious injury, 2001
|